Professional manufacturer of packaging equipment

Product Detail
HWFT-1250 Single-Sided Laminating Machine Iron
HWFT-1250 Single-Sided Laminating Machine Iron
Product Detail


Application area:

Technical Data and main configuration

Film roll unit

Technical Data:

The film roll is made of single stand stand and 5 kg magnetic powder brake.
Inflatable shaft supporting shaft length
1050mm
Max.Unwind Diameter
600mm
Tension control range
3-30kg
Tension control precision
±0.25kg
Volume of roll
±20mm


Coating unit

Technical Data:

Coating roll length
1050mm
Cots diameter
165mm(100 Line)
Coating roller
120mm NBR shore (A) 70°
Glue pressure
350kg
Driving motor

2.2kwAll digital AC frequency conversion control

system


Functional characteristics

Coating roller is a quantitative way, for the overall structure of the roller coating.

Applying pneumatic pressure roller, adjustable pressure roller coating for shaft type, quick change, two anti falling cylinder, automatic locking clutch.

Scraper device for three position adjustment structure.

The hopper is open and self adjustment.

The coating roller is driven by a single motor, and the tension control precision is high.

The feed adjusting roller is a bilateral adjusting method

The overall design of rigid coating, rollers, a quick replacement function

Oven unit

Technical Data:

Maximum box temperature
100
Inside material length
8000mm
wind speed
30m/s
Electric heating
3KW*6*3
injector
16 individual
Oven for cylinder opening type.

Temperature control precision
±1℃
Maximum air supply
1500m3/h
Fan power
1.5kw×3


Functional characteristics

Two return to save energy

Air top oven, mounting decorative plate and material handling operating platform

A number of return road, in the entire with cyclone layout, and is full of volatile solvents.

The entire oven negative pressure design, hot air does not blow out the oven

Subsection temperature zone, automatic constant temperature control

High wind speed can create a low temperature drying

Pre exhaust air will be volatile solvent emissions, exhaust gas does not participate in the two cycle, to ensure safety

Correction device for oven outlet

Composite unit

Technical Data:

Composite roll
270mm
The pressing rollers
160mm three Yuan Shao Er (A)70°-75°
Back pressure roller
150mm Plated steel roller
Maximum temperature of composite roll
240℃
Preheat roll
100℃
Power
9kw
Driving motor
7.5kw full digital Yaskawa inverter control system
Compound pressure
2100kw
Tension setting range
3-30kg


Functional characteristics

Single drive and closed loop tension control to ensure that the composite film with constant tension, finished products

The tension of the dryer is the tension detection of the pressure sensor, and the full closed loop tension control system

The surface temperature of the precision hot roller is ensured by the heating system of the external oil heating box

The pressure and pressure of the pneumatic clutch mechanism can be adjusted

Individual drive can be set to a smaller tension, avoid the large tension in the case of the inner membrane elongated

Temperature control for non-contact or precision temperature control system

Receiving unit

Technical Data:

Inflatable shaft support roll length
1100mm
Roll diameter
600mm
Tension control range
3-30kg
Single coil magnetic powder clutch
50NM
Volume of roll
±20mm


Hydraulic release unit

The machine frame is welded by steel plates

Four pieces of hydraulic expansion diameter range is 450mm, the 508mm arm length 1100MM

Roll center height 1050mm,

Using magnetic particle brake tension 40KG

The frame is arranged at the bottom of the movable roller, electric moving screw, the adjusting range of 200mm

Four cylinder hydraulic drill, motor 5.5KW

Tin oven unit

Metal preheat oven, gas top open, built-in quartz tube, chrome guide roller 5.

Rectifying unit

With eight type dryer outlet rectifying device adopts hydraulic rectification

Is 200*1050mm 2 support rollers

S roll unit

The frame is composed of steel plate welding process, welding base adopts steel plate, auxiliary good

S and by three yuan 400*1050mm 2.

Double cylinder pressing, pressing roller for 150mm rubber roller, the roller is 100mm for iron roller

Magnetic powder brake 20 kg.

Hydraulic coil winding machine

The base is composed of steel plate welding and processing

Hydraulic expansion diameter range is 450mm, the 508MM arm length 1100MM.

Roll center height 1050mm

The winding motor 15kw, inverter motor Yaskawa 15kw

Reducer center distance 750mm, speed ratio 31.5

13812128091

General manager:Mr Wu

Add:Southeast Avenue, Jiangyin, Jiangsu
Zip:215600
E-mail:1154572418@qq.com
Tel:+86-512-5816 5283
Fax:+86-512-5816 5283
 Online Service
www.hehedesign.com